Clearance Rack

1. Look up your suppressor (or similar if your exact model is not listed) in our Suppressor Cover Size Chart
2. The cover type best suited for your application will depend on you. If you need a Light, Medium, Heavy, or even Custom Cover, go to that product page by clicking on the cover type.
3. Pick the appropriate Cover Length from the “Length” drop down above, and make sure both the length and diameter match the Cover Size Chart or the length best suited for your suppressor configuration, weapon system setup.
Flash Caps / Flow Through Front Ends should be left completely exposed.
QD’s should be covered in most cases to prevent the cover from flying off. You can leave them exposed if the QD is smaller than the suppressor diameter that is being covered.
EXAMPLE: The Deadair Nomad 30 is 1.75″ dia and the KeyMo QD is 1.5″ dia, so in this case, the best cover size would be 6.5″ x 1.75″, leaving the QD Exposed.
**THIS NEXT STEP IS VERY IMPORTANT**
4. If you pick the wrong color, or enter the wrong size, or need a Custom Cover and order a regular one, IT WILL STOP YOUR ORDER, AND WE WON’T SHIP UNTIL WE SPEAK TO YOU.
5. Enter your suppressor details below (make, model, QD type, aftermarket front cap)
**
If you are unsure about which cover you need, please contact us before ordering via our live chat or contact us form

1. Look up your suppressor (or similar if your exact model is not listed) in our Suppressor Cover Size Chart
2. The cover type best suited for your application will depend on you. If you need a Custom Light, Custom Medium, or Custom Heavy, click on that cover type.
QD’s should be covered in most cases to prevent the cover from flying off. You can leave them exposed if the QD is smaller than the suppressor diameter that is being covered.
EXAMPLE: The Deadair Nomad 30 is 1.75″ dia and the KeyMo QD is 1.5″ dia, so in this case, the best cover size would be 6.5″ x 1.75″, leaving the QD Exposed.
**THIS NEXT STEP IS VERY IMPORTANT**
3. If you order the wrong cover type or size, IT WILL STOP YOUR ORDER, AND WE WON’T SHIP UNTIL WE SPEAK TO YOU.
4. Enter your suppressor details below (make, model, QD type, aftermarket front cap)
**
If you are unsure about which cover you need, please contact us before ordering via our live chat or contact us form

Enter the “COVER SIZE” below that will fit your suppressor

BPG may correct any order at their discretion to prevent an RMA exchange.
– Click “YES” below to ACKNOWLEDGE & ACCEPT ORDER TERMS