The Burn Proof Gear – Suppressor Cover – Evike Airsoft Edition
are designed to fit suppressors that are 1.38 to 1.5 inches in diameter and can be made to fit any length. The Burn Proof Gear Covers are designed to allow the sleeve to cinch around the front and rear ends of the suppressor to ensure a “No-Slip Fit.” Once the cover is installed on a suppressor, the outer diameter will not exceed 1.5 inches. The lengths range from 5 inches to 9 inches long and weigh less than 2 ounces at the shortest configuration and 3 ounces at the longest. The cover is one piece made from Mil-Spec 1000D Cordura rated to 300 F. The Original Burn Proof Gear suppressor covers withstand the most rigorous abuse, are combat proven, Made in the USA, and are lifetime guaranteed.
- AAC Tirant 45 (8.7″ long by 1.38″ diameter excluding piston / direct thread attachment), you need a 9″ x 1.38″ cover.
- The SilencerCo Harvester (9″ long by 1.38″ diameter, direct thread, with brake), order a 9″ cover to leave brake exposed while cinching around the rear end-cap.
- Please measure the suppressor tube and add 0.5″ then select the nearest cover length rounding up (do not exceed 0.5″ extra length or go below .25″ extra length).
- To leave QD exposed, measure from the front end-cap to before the QD and choose the nearest length rounding down. Email us if you still have any doubts.