Deadair Suppressor Cover

Description

This Suppressor Cover product page is designated specifically for Suppressors made by Dead Air.

The BPG Suppressor Cover Heavy is designed to fit suppressors that are 1.5 inches in diameter and can be made to fit any length. The Burn Proof Gear Covers are designed to be 0.5 inches longer than the suppressor itself. This allows the cover to cinch around the front and rear of the suppressor to ensure a “No-Slip Fit.” The Heavy cover is rated up to 150 rounds full auto within a 15 minute firing schedule, compatible with all rifle caliber (.223, 300 BLK, .308, 5.56 NATO, 7.62 NATO) suppressors. Once the cover is installed on a suppressor that is 1.5 inches in diameter, the outer diameter will not exceed 1.75 inches. The standard cover sizes range from 6 inches to 9 inches long and weighs less than 3 ounces at the shortest configuration and 5.5 ounces at 12.5 inches long. The cover is a two piece design; an inner fiberglass sleeve rated to 2000 F and the outer Kevlar / Nomex cover rated to 1000 F. The covers resist the extreme heat generated from suppressors and enable the operator to transition from rifle to pistol confidently without burning their legs, pants, or other gear. Additionally, they eliminate heat mirage on precision rifle applications and any IR emitted in night operations. The Burn Proof Gear suppressor covers withstand the most rigorous abuse, are combat proven, Made in the USA, and are lifetime guaranteed.

For installation help or to see our suppressor covers being used, visit our YouTube channel: Suppressor Cover Install Tutorial

Product Specifications and Use Restrictions

Suppressor Cover – Heavy – Black (1.5″ – 1.75″ Diameter)

• Outer layer in Black Kevlar fabric rated to 1000 F
• Inner material is high temp fiberglass rated to 2000 F
• DO NOT EXCEED 120 ROUNDS WITHIN 5 MINUTES and allow cover to cool completely before the next firing iteration (failure to comply voids your warranty).

Suppressor Cover – Heavy – Wheat Tan (1.5″ – 1.75″ Diameter)

• Outer layer in Wheat Tan Kevlar fabric rated to 1000 F
• Inner material is high temp fiberglass rated to 2000 F
• DO NOT EXCEED 120 ROUNDS WITHIN 5 MINUTES and allow cover to cool completely before the next firing iteration (failure to comply voids your warranty).

Suppressor Cover – Medium – (1.38″ Diameter)

• All pistol diameter suppressors (1.38″) are made as Medium covers and are rated to 800 F.